Taylor TE30WD Manual De Instrucciones página 5

PREPARING SCALE FOR WEIGHING
Before Weighing
1. Please select the scale's channel to match the wireless
display. (The scale's channel indicator is located on the
scale's base; please remove the rubber stopper to access
the channel
display is
scale.(Please see Page 6 for instructions for selecting
platform channels.)
2. Press the ON/OFF button to turn on the scale.
3. Please make sure that the distance between the scale
base and the
meters).
Note: If the scale's channel is not same as the wireless
display, '88888'will appear on the display. Set the scale
and wireless display to the same channel.
Weighing
1. Press the ON/OFF button to turn on the scale.
2. '88888' appears on the screen, then '0' and '
flash. The scale is ready for use.
*NOTE- If the "88888" display does not show '01, press the
button to change the wireless display's channel to
match the scale's channel. For example: If the scale's
channel is set to Channel-1, please select Channel-1 for
the wireless display also.
4
indicator.)For
using Channel-1,
wireless
example:
select
display is
If the
Channel-1
within 30
wireless
for the
feet (10
'will