Publicidad
Idiomas disponibles
Idiomas disponibles
b) Avoid touching grounded components such as pipes, radiators, cookers and
refrigerators. The risk of electric shock is increased if the body is grounded and
touches the device exposed to direct rain, wet pavement or operation in a
humid environment. If water penetrates into the device, it increases the risk of
damage to the unit and of electric shock.
c)
Do not touch the device with wet or damp hands.
d) Do not use the cable in an inappropriate manner. Never use it to transport the
device or to pull the plug out of the socket. Keep the cable away from sources
of heat, oil, sharp edges or moving parts. Damaged or tangled cables increase
the risk of electric shock.
e) If use of the device in a damp environment cannot be avoided, a residual
current device (RCD) must be used. Using an RCD reduces the risk of electric
shock.
f)
Do not use the device if the power cable is damaged or shows clear signs of
wear. A damaged supply cable should be replaced by a qualified electrician or
the manufacturer's service technician.
g) To avoid electric shock, do not immerse the cable, plug or the device itself in
water or other liquids. Do not use the device on wet surfaces.
h) ATTENTION – RISK OF DEATH! When cleaning or using the device, never
immerse it in water or other liquids.
2.2.
Safety in the workplace
a)
Do not use the device in an explosive area, for example where flammable
liquids, gases or dust are present.
b)
In case of finding any damage to the device or irregularity in its operation, it
should be immediately switched off and reported to an authorised person.
c)
In case of doubt as to whether the device is working properly, contact the
manufacturer's service centre.
d)
The device may only be repaired by the manufacturer's service centre. Do not
attempt to make any repairs yourself!
e)
In case of fire or fire ignition, only powder or snow (CO2) extinguishers should
be used to extinguish the live device.
f)
Use the device in a well-ventilated area.
g)
Make sure to regularly check the condition of the safety information stickers.
If the stickers are illegible, they must be replaced.
h)
Keep this manual for future reference. If the device is to be passed on to third
parties, the instructions for use must also be handed over with the equipment.
i)
Keep parts of the packaging and small assembly parts out of the reach of
children.
j)
Keep the device away from children and animals.
Publicidad
