VOSTERIO B-619 Manual De Instrucciones página 9

TURNTABLE MAINTENANCE
Turntable Body
· When the turntable body is dirty or dusty, first disconnect the power adapter, and then wipe off
the dirt and dust with a soft, dry cloth.
· Do not use benzenes, thinners, etc
· When storing the product for a long time, disconnect the adapter f rom the outlet and wrap the
producti n plastic; do not allow it to become damp; the drive belt should be removed to prevent
unequal stretching.
Stylus Tip
· If dirt and grime are stuck to the stylus tip, clean it with a commercially sold brush.
· We recommend using a stylus cleaner (not included) if the stylus tip is considerably dirty.
Clean the stylus tip by moving the brush from the rear to the front of the stylus tip.
Replacing the Stylus
It's suggested to replace the stylus after 400 hours of use.
Removing an old stylus:
• In addition to the deterioration of sound quality, records may also be
damaged as the cartridge's stylus tip wears down.
• Be sure to disconnect the product's AC adapter from the outlet.
• When replacing the stylus, hold the headshell and the cartridge body
tightly. Rotate the front of the stylus in a forward and down motion.
IInstalling a Replacement Stylus
1. Mount the new replacement stylus to the cartridge.
Engage in body first
2. Lift the stylus up until you hear a click.
3. Make sure there is no gap between the headshell and the
cartridge.
TECHNICAL SPECIFICATIONS
Power Supply
Power Consumption
Power output
Speaker unit
DC12V / 2A
< 25 Watts
15 Watts X 2 Rms
4" 4Ω/20W*2
7