Sundstrom SR591 Instrucciones De Uso página 17

4.4.6 To change the sweatband
• Remove the sweatband. Fig. 19.
• Fit the sweatband on the head harness. Fig. 20-23.
4.4.7 To change the head harness
• Remove the head harness from the welding shield by
releasing the two fixing points. Fig 24.
• Fit a new sweatband, see 4.4.6 To change sweatband.
• Secure the two fixing points of the head harness. Fig. 25.
• Check that the head harness is locked in the fixing points
of the welding shield.
• Adjust the head harness accoring to the instructions in
section 3.2 Donning.
5. Technical specification
Weight
345 g
Welding filter
Size 110x90 mm. Shade EN 8 to EN 13.
Welding filter, automatic
Size 110x90 mm. Shade EN 3/10, EN 3/11 and EN 4/5 - 13.
Solar cell powered.
Protective lens, PC
Size 110x90 mm.
Correction lens
Size: 108x51 mm. 1.0, 1.5, 2.0 and 2.5 dioptres.
Temperature range
• Storage temperature: from -20 °C to +40 °C at a relative
humidity below 90 %.
• Service temperature: from -10 °C to +55 °C at a relative
humidity below 90 %.
Shelf life
The equipment has a shelf life of 5 years from the date of
manufacture.
6. Key to symbols
See user instructions
Date clocks, year and month
CE approved by
INSPEC International B.V.
Relative humidity
<XX% RH
Temperature range
+XX°C
-XX°C
7. Approval
The SR 591 is approved in accordance with EN 175.
Marked: EN 175 -F.
-F = mechanical strength - protection against low energy
impact.
Visor
The visor is tested in accordance with EN 166:1995.
Marked: AR 1 F
Visor frame
The visor frame is tested in accordance with EN 166:1995.
Marked: AR EN 166 F
AR: Manufacturer
1: optical class
F: low energy impact
The PPE Regulation (EU) 2016/425 type approval has been
issued by Notified Body 2849. For the address, see the
reverse side of the user instructions.
The EU declaration of conformity is available at www.srsafety.
com
17