Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting (continued)
REMOVING VALVE CAP ASSEMBLY
Turn off water supply and flush out tank. Push float up
with right hand (see picture). Grip and hold shaft
under float with right hand. With left hand, twist cap
and lever counter clockwise 1/8
the top cap. Pressing down on top may be helpful with
older valves. Let cap assembly hand out float cup.
FLUSHING OUT DEBRIS
Hold cup upside down over uncapped valve to prevent
splashing. Turn water supply on and off a few times.
Turn water supply off when putting cap back on valve.
IF REPLACING SEAL
Use only a genuine Fluidmaster 242 seal.
REPLACING VALVE CAP
A. Place cap assembly on top of grey valve body
by aligning cap arm and adjustment rod next to
refill tube.
B.
Press down on top cap while rotating top
arm clockwise to locked position.
Fluidmaster Replacement Parts List
Part Name
Fill Valve
Replacement Seal
Flush Valve
of a turn to unlock
th
Model Number
□
Fluidmaster 400A
□
RA2417005
□
R&T A2429
242
SEAL
A
B
Home Depot SKU
□
#147966, #100554467
9
Please contact 1-855-HD-GLACIER for further assistance.
HOMEDEPOT.COM/GLACIERBAY
Publicidad
