USE
Check that the scooter is correctly assembled before each use. The steering column must always
engage in its vertical locking position with an audible "click", the same applies for the quick-release
of the steering column and the folding mechanism.
Keep hold of both handles.
Place one foot at the front of the deck.
Use the other foot to push away from the ground to make the scooter move forwards.
Once you have reached your desired speed, you can stand with both feet on the deck.
To stop, step on the rear brake with your closest foot or use the handbrake.
Note: The brakes can become hot during use. Do not touch them after riding.
MAINTENANCE AND CARE INSTRUCTIONS
The assembly, care and maintenance of the scooter must be carried out by an adult.
Do not use aggressive cleaning agents, brushes with metal or nylon bristles, or sharp or metallic
cleaning utensils such as knives, hard spatulas etc. These can cause damage to the surfaces. Only
clean the scooter with a damp cloth. Then wipe with a dry cloth.
Check the tightness of bolted parts before each use, paying particular attention to the wheel axles,
folding axle, brakes, suspension fork and collar clamp, as self-locking bolts and fasteners can
become loose.
Always replace worn parts with original parts.
Remove any sharp fragments that arise from use.
Store the scooter in a clean, dry place.
Do not make any changes or modifications to the scooter.
DISPOSAL
At the end of your item's long service life, please dispose of the valuable raw materials properly
so that proper recycling can take place. If you are not sure how best to proceed, the local waste
disposal companies or recycling centres will be happy to help.
Check the condition of the bearings and wheels regularly and replace if
necessary.
10
www.DEUBAXXL.de