Publicidad
Idiomas disponibles
Idiomas disponibles
See overview page 2
1. Handles
2. Quick-release lever for handles
3. Steering column push button
4. Rear wheel brake/mudguard
5. Locking lever for folding mechanism
6. Handle push button
ASSEMBLY (see page 32-33)
Notes:
Be careful when unfolding and folding the scooter (danger of trapping).
Make sure that all locking components engage properly when unfolding and folding the scooter.
UNFOLDING THE SCOOTER
A.
Unfolding the steering column
Open the quick-release lever (11), push the locking lever (5) forward to release the folding
mechanism (10). Raise the steering column (9) to the vertical locking position (it should engage
with a "click") and securely close the quick-release lever (11).
B.
Attaching the handles
Remove the two handles (1) from their plastic holder bracket (7) and insert them into the right and
left sides of the handlebar.
Both handles (1) should engage with an audible "click". Check that the two push buttons (6) have
definitely popped up and are visible.
For scooters with suspension, open the quick-release lever (2) and follow the instructions below
before securely closing it again.
C.
Adjusting the handlebar height
Open the steering column's quick-release lever (8), adjust the handlebar height until you hear a
"click", which indicates it has locked into one of the two possible positions, and securely close the
quick-release lever (8) again.
FOLDING THE SCOOTER
D.
Folding the handlebar
Open the steering column quick-release lever (8), push in the steering column push button (3),
push the handlebar downwards and then securely close the steering column quick-release lever
again (8).
E.
Storing the handles
Push in the push button (6) for each handle (1), pull the handles (1) out of the handlebar and secure
them in the plastic holder bracket (7).
F.
Folding the steering column
Open the quick-release lever (11), push the locking lever (5) forward to release the folding
mechanism (10). This is easier if you push the steering column (9) forwards. Now push the steering
column (9) down into the locking position and securely close the quick-release lever (11).
7. Plastic holder bracket
8. Quick-release lever for steering column
9. Steering column
10. Folding mechanism
11. Quick-release lever for folding
mechanism
9
www.DEUBAXXL.de
Publicidad
