Sun Line
Assembly instructions and
user manual
Carefully read through the
complete assembly instruc-
tions and user manual, par-
ticularly the safety instructions. Failure to
heed these safety instructions may result
in severe injury or damage to the sun
shade. Store the assembly instructions
and user manual for future reference and
always include them when passing the
sun shade on to third parties.
Your safety
Please observe the following
safety instructions. The manu-
facturer is not liable for damage
as the result of failure to comply.
Only use the sun shade with sufficient
ballasting (see "Technical data").
Always place the sun shade on a firm
and level surface.
Use a stable support foot for the sun
shade.
The sun shade should be erected by a
competent adult.
When opening and closing the sun
shade, please make sure to keep your
hands outside of the folding mechanism.
In the case of approaching wind or
storm, close the sun shade and secure
it with the tie strap. Otherwise, it could
be caught by a gust and overturned and
inflict damage in the process or sustain
damage as a result.
Never ignite an open fire in the vicini-
ty of or underneath the sun shade. The
sun shade may catch fire or be damaged
by airborne sparks. Keep the sun shade
away from intense heat sources such as
patio heaters, barbecue etc.
The sun shade is not a children's toy.
Children could trap their fingers. Also,
the sun shade is heavy and could injure
persons if it tips over.
Do not hang anything on the lateral brac-
es of the sun shade or even use them for
chin-ups.
The sun shade can protect your skin
from direct UV radiation, but not from re-
flected UV rays. For this reason, please
also use a cosmetic sun block.
In order to protect the sun shade from ex-
cessive strain, close the sun shade in the
event of rain or snow and secure it with
the tie strap.
The cover is not suitable for machine
washing, dry cleaning or bleaching.
Do not use aggressive chemical cleaning
agents or fluids, solvents, abrasive sub-
stances or objects, bleaching agents,
high-pressure cleaners or strong clean-
ing products.
Please note the information on the care
label sewn into the sun shade.
Intended use
The sun shade is suitable for providing
protection against direct UV radiation.
It is not intended to provide protection
against rain or snow.
Setting up the shade
To secure the sun shade, you must use
the following shade base: for the model
150
85897KQ
200
85897AET
250
85897AMT
185 × 120
85897AGT
225 × 120
85897AGT
260 × 150
85897AGT
1. Place the sun shade base in the de-
sired location.
2. Release the locking mechanism 1 of
the bottom pole 2 (see figure A).
3. Let the shade pole 3 slide at least
10 cm into the bottom pole 2. Tighten
the locking mechanism 1 by turning it
clockwise (see figure B).
GB
25 kg
30 kg
40 kg
50 kg
50 kg
50 kg
9