Publicidad
Idiomas disponibles
Idiomas disponibles
•
The top section of the pole has a small horizontal
slot on one side and a small circular slot on the
other as shown.
* The side with the circular slot is for screwing the tilt range screw (7).
And the side with the horizontal slot is for the tilt range knob (5).
•
Take the head assembly and place the neck
section over the end of the pole..
•
Slide the tilt adjustment bolt (6) all the way in.
•
Screw the knob (8) with the tilt range knob (5) as
shown and push inwards.
|
24
1
1.
Horizontal slot
2.
Circular slot
2
Publicidad
