Publicidad
Idiomas disponibles
Idiomas disponibles
V. Usage instruction
1. Before the first-time use
a. Wipe all the joints and connections with tissue to check if there is leakage.
If the tissue stays dry, it means the system is installed properly.
b. Turn on the faucet to allow water to run for 10 minutes to flush the air and
carbon nes through the lters. After that, the system is ready and you can start
to consume the filtered water.
2. User interface
1
2
3
When the faucet is turned on, all the indicators will light up to show the filter
lifetime and the battery lifetime.
When the system is in standby mode, all the indicators will be off. You may press
the reset button and the indicators will light up to show the filter lifetime and the
battery lifetime.
a. Filter lifetime indicator
Status
More than 7 days
Less than 7 days or
has reached the end of life
4
5
Constant blue light
Flashing blue light
CBPA filter lifetime indicator
1
UF filter lifetime indicator
2
Reset button
3
CB filter lifetime indicator
4
Battery lifetime indicator
5
Indicator
9
Sound alert
N/A
There will be beeps whenever
the faucet is turned on,
reminding you to replace the lter.
Publicidad
