WERKU WK400280 Instrucciones Originales página 4

into the accessory. Regularly clean this power
tool's air vents. The motor's fan will draw the dust
inside the housing and excessive accumulation of
powdered metal may cause electrical hazards.
STORAGE.
Store power tools out of reach of children and not
allow the handling of power tools to people unfami-
liar with the tools or these instructions. Power tools
are dangerous in the hands of untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
there are no broken parts or other conditions that
may affect the operation of power tools. Power tools
are repaired before use when they are damaged.
Many accidents are caused by poorly maintained
power tools. Use power tools, accessories and tool
tips, etc. according to these instructions and in the
manner provided for the particular type of power
tool, taking into account the conditions work and
work to develop. The use of the power tool for appli-
cations other than those intended could result in a
dangerous situation. Please check your power tool
serviced by a Werku
only identical replacement parts. This will ensure the
safety of the power tool is maintained.
CHECK CONDITION.
Make sure that all the screws in the power tool
are perfectly tightened. In cold climates or when
the power tool has not been used for a period,
allow the power tool to warm up by leaving it to
run empty for a few minutes, to ensure that all in-
ternal components are perfectly lubricated. Make
sure that the possible installed accessories are
perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that the power tool is firmly supported
before using. Check that no one is standing be-
neath you when using the power tool in high areas.
Keep your hands away from all moving parts of the
power tool. Use auxiliary handles, if supplied with
this power tool. Loss of control can cause personal
injury.
DURING THE OPERATION.
Do not leave the power tool operating without ha-
ving it firmly fixed. Only turn it on when you are
official repair service using
®
sure you have full control over it. Do not point the
power tool at anyone while in use. When operating
the power tool will produce vibrations. The screws
may gradually come loose, and possibly cause
faults or accidents. Keep your hands away from
all moving parts of the power tool.
AT FINISH WORKING.
Do not touch the possible accessories installed in
the power tool after use. It may be hot and cause
burns. Some materials worked with may contain
chemicals or toxic components. Avoid inhaling
these substances or allowing them to come into
contact with your skin. Use PPE designed to pre-
vent and protect against incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The cordless driver drill has been designed to drill,
screw and unscrew. Refer to this plan to familiarize
yourself with the cordless driver drill before use.
1
6
9
1. Chuck.
2. Switch.
3. Rotation selector.
4. Handle.
5. Battery.
6. Torque selector.
7. Gear selector.
8. Battery charge Indicator.
9. LED lamp.
10. Belt clip.
USE INSTRUCTIONS.
Before starting up the cordless driver drill, we recom-
mend that you carefully read all of the instructions as
indicated. Please respect all regulations regarding
the prevention of accidents, health and safety direc-
tives, laws and applicable restrictions for work pla-
4
English
8
7
10
3
2
4
5