Xavax 00111258 Instrucciones De Uso página 2

G Operating instruction
1. Use
• The milk frother is suitable for cappuccino, latte macchiato, milkshakes, cocktails or
other milk-based products.
• Fill your vessel with the desired amount of liquid. Please note that the height of the
container should be at least twice as high as the amount of milk filled in.
• The milk should be heated to a maximum of 60°C for optimum frothing.
• Take the milk frother in your hand, immerse the rotor head completely in the liquid
and push the on/off button forward to start the frothing process. Slide the on/off
button back again to finish the process.
• Move the milk frother with the rotor head fully immersed
up and down for 15-20 seconds.
• When a sufficient froth head has formed, first push the On/Off button back to finish
the process, then remove the milk frother from the liquid.
2. Changing the battery
• Open the battery compartment by sliding the latch of the battery compartment to
the side.
• Insert two new AA/Mignon batteries, observing the polarity.
• Slide the battery compartment lock fully back into the original position.
3. Safety instructions
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating and use it in dry environments
only.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not operate the product continuously, as it is not designed for this.
• Do not attempt to service or repair the product yourself. Leave any and all service
work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in
direct sunlight.
• Do not use the product in areas in which electronic products are not permitted.
• Do not drop the product and do not expose it to any major shocks.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately in accordance with the locally applicable
regulations.
• Do not operate the product outside the power limits given in the specifications.
• Only use the article under moderate climatic conditions.
2