Lindy 38396-7 Manual De Usuario página 9

User Manual English
On the Video page, Main Stream and Sub Stream can be set separately. Encoding Format can be set
to H.265/H.264 according to the decoding protocol used in the 3rd party software which decodes the
Secondary Stream. Pull the drop-down box to select the desired format.
The Resolution of the Main Stream includes Auto, Horizontal and Vertical. If Auto is set to ON, the
resolution will follow the input resolution; Horizontal and Vertical display the current input resolution and
are grayed out so cannot be set. If Auto is set to OFF, then Horizontal and Vertical can be set to the
resolution of the Main Stream encoding. The horizontal range is 960~1920, the vertical range is
540~1080, and it needs to be an even number. Click on Apply to confirm.
The Resolution of the Sub Stream includes Horizontal and Vertical and can be set to the resolution of
the Sub Stream encoding. The horizontal range is 320~960, the vertical range is 180~540, and it needs
to be an even number. Click on Apply to confirm.
Bitrate is used to set the bit rate of the encoding.
Setting Page
The Setting Page includes two parts: Network and Login.
Network can be set to Static or DHCP. When is set to Static, IP address, gateway and subnet mask
can be entered; When set to DHCP, the IP address, gateway and subnet mask are grayed out and
cannot be changed.
A DHCP server (such as a network router) which automatically assigns IP related settings, should be
installed in the system. Web Port is the port of the Web page. Click on Save to confirm.
After setting the IP address, the page will automatically switch to the chosen IP address. Click on Set
Network Defaults to restore to the default DHCP state.
The Web login password can be changed on the Login part. Enter the old password in Old Password,
enter the new password in New Password, enter the new password again in Confirm Password, and
click on Save button to confirm.
Update Page