Publicidad
Idiomas disponibles
Idiomas disponibles
2. SAFETY
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual
for further information.
Earth ground
Double insulation
CAUTIONS
• Before the measurements, the meter should be preheated to 30 seconds
• Inspect the condition of the test leads and the meter itself for any damage before operating
the meter.
• Improper use of this meter can cause damage, shock, injury or death. Read and understand
this user manual before operating the meter.
• Always remove the test leads before replacing the battery or fuses.
• Voltage checks on electrical outlets can be different and misreading because of the
uncertainty of connection to the recessed electrical contacts. Other means should be used to
ensure that the terminals are not "live".
• Use great care when making measurements if the voltages are greater 60VDC or 36V AC RMS,
these voltages are considered a shock hazard.
• Always discharge capacitors and remove power from the device under test before performing
Diode, Resistance or Continuity tests.
• To avoid damages to the meter, do not exceed the maximum limits of the input values shown
in the specification.
• In case the device is going to be unused for an extended period of time, remove the batteries
to prevent them from draining.
• When "
" icon appears at the display, please change the new battery to avoid wrong
readings.
MAINTENANCE
• Repair and calibration must be carried out by professional staff.
• If you observe any abnormalities of meter, please apply for repair or maintenance.
• Do not operate the meter with an open case.
• If the meter is not to be used for a period, remove the battery and store it separately.
32
Publicidad
