Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL INFORMATION
This manual must always accompany this device and it must be kept in an accessible place so that the users and those responsible
for its maintenance can consult it.
It is recommended that the installer/user should carefully read the specifications and the information contained in the present
manual before using the product in order to avoid damage, the improper use of the equipment or the forfeiture of the guarantee.
This product must not be used by children or by persons with a reduced physical, sensory or mental capacity, or by those who
lack experience or knowledge, if they have not received the necessary supervision and instruction. Care must be taken to avoid
children playing with the device.
The manufacturer does not accept any responsibility in the event of accidents or damage caused by negligence or non-compliance
with the instructions contained in this brochure or in conditions which differ from those set out below. Also it does not accept any
responsibility for damage caused by the improper use of the pump.
Do not place any weights or other boxes on top of the package.
SAFETY REGULATIONS
In this manual symbols with the following meaning have been used:
This symbol warns that non-compliance with the specifications brings with it the risk of electric shocks.
This symbol warns that non-compliance with the specifications brings with it the risk of harm to persons
or damage to property.
Before installing and using the product:
• Carefully read this manual in all its parts.
• Installation and maintenance must be carried out by qualified personnel responsible for establishing the electrical connections
in accordance with the existing rules and regulations.
• The manufacturer does not accept any responsibility for damage caused by maintenance or repairs carried out by unqualified
personnel and /or by spare parts which are not original.
• The use of spare parts which are not original, tampering or misuse will result in the forfeiture of the guarantee.
During the initial installation and in case of maintenance make sure that:
• The power supply has been switched off
• The power supply is provided with safeguards and in particular a highly sensitive circuit breaker (30 mA in class A for domestic
applications and in class B for industrial applications) and grounding in conformity with the rules.
• Before removing the lid of the inverter or starting procedures on it the power supply must be disconnected before waiting at
least five minutes so that the capacitors have the time to lose their charge through the incorporated discharge resistors.
• Do not remove the board cover and/or disconnect the electricity to the pump if the inverter is in operation.
• WARNING: when the TISSEL-200 is out of service (red LED flashing) it is still electrically charged. Before any form of intervention
on the pump or on the inverter it is obligatory to disconnect the power supply to the pump.
Emergency Stop
Whilst the TISSEL-200 is in operation it is possible to carry out an emergency stop by pressing the OFF/ON switch.
ENGLISH |
27
Publicidad
