OPERATION
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
SWITCHING ON
• Press the lock-off button and squeeze the on/off switch. Once unit turns on release the lock-
off button while continuously holding the on/off switch for operation.
SWITCH OFF
• Release the On/Off switch.
CUTTING GRASS
• Place the tool horizontally over the area you wish to cut. Results are best when the lawn is
dry. Unlock the safety switch, and then depress the ON/Off switch to cut the grass.
NOTE: To avoid serious personal injury, always turn off the machine before cleaning or when
removing jammed material. Use a soft brush to remove debris from intakes and cutting blade.
Then restart the machine.
TRImmING HEDGES
• The device may be used to trim small hedges and shrubs. Hold the device in a slight angle
to the hedge you would like to trim. first, trim the lateral areas from the lower to the upper
edges, and then trim the top edge.
12