Skil FN0400D-00 Manual Del Propietário página 13

To Attach/Detach Battery Pack
(Fig. 2)
To attach the battery pack:
1. Make sure that the low/off/high switch is in the
OFF position.
2. Align the raised rib on the battery pack with
the grooves on the clamp fan, and then slide
the battery pack onto the clamp fan.
NOTICE: Make sure that the latch on the battery
pack snaps into place and that the battery pack
is secured to the fan before beginning operation.
To detach the battery pack:
1. Make sure that the low/off/high switch is in the
OFF position.
2. Depress the battery-release button located on the front of the battery pack to release the
battery pack. Pull the battery back out and remove it from the fan.
To Start/Stop the Fan (Fig. 3)
To start the fan
Press the left or right side of the switch down.
For low speed, press the left side of the switch (marked "I") all the way down.
For high speed, press the right side of the switch (marked "II") all the way down.
To stop the fan
Press the raised side of the switch (either "I" or "II") down so that both left ("I") and right ("II")
sides of the switch are up and only the center of the switch (marked "O") is down.
Fig . 3
Low/Off/High Switch
LOW (I) position
Fig . 2
Low/Off/High
Switch
Battery-release Button
HIGH (II) position
Detach
OFF (O) position
Attach
13