Publicidad
Idiomas disponibles
Idiomas disponibles
Powering the Fan
WARNING
this manual, use of any other battery packs
may cause a risk of personal injury or
explosion.
You may power the product via the following
two methods:
1) Power the fan with the SKIL battery packs
designated in this manual.
2) Use a USB power adapter and a USB-C
cable (both are not included) to power the
fan via USB-C power inlet port (Fig. 4).
NOTE: When the USB power cable is used, the
battery pack is automatically disconnected. The
USB power cable should be disconnected from the power inlet port when not in use.
NOTE: If the switch is left in the ON position, the fan will not restart when the battery pack is
inserted. Turn the fan OFF and then ON to restart it. However, the fan will restart as soon as
the USB power cable is connected.
Adjusting the Fan Head Angle
To adjust the fan head angle, make sure the
base is securely mounted, then gently tilt or
pivot the fan head to the desired position.
Pivot (horizontal angle) adjustment (Fig. 5a)
300° (pivot LEFTWARD within a range of 200°,
RIGHTWARD within a range of 100°)
Tilt (vertical angle) adjustment (Fig. 5b)
270° (pivot INWARD within a range of 45°,
OUTWARD within a range of 225° )
14
Use only the designated
SKIL battery packs listed in
Fig . 4
USB-C Power Inlet Port
Fig . 5a
Fig . 5b
INWARD
OUTWARD
Publicidad
