Descargar Imprimir esta página

Dexter 300SD2-23.5 Manual De Instrucciones página 103

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
"live" wire may make exposed metal parts of the power too"live" and could
give the operator an electric shock.
At higher speeds,the bit is likely to bend if allowed to rotate freely
without contacting the workpiece,resulting in personal injury.
At higher speeds,the bit is likely to bend if allowed to rotate
freely without contacting the workpiece,resulting in personal injury.
c)Apply pressure only in direct line with the bit and do not apply
excessive pressure.Bits can bend causing breakage or loss of
control,resulting in personal injury.
1. Damage to lungs if an effective dust mask is not worn.
2. Damage to hearing if effective hearing protection is not worn.
3. Health defects resulting from vibration emission if the power tool is being
used over longer period of time or not adequately managed and properly
maintained.
This tool is intended to be used for drilling in wood and metal sheets, screwing.
Do not use machine for works other than those for which they are designed for!
All other applications are expressly ruled out.
Cutting accessory or fasteners contacting a

Publicidad

loading