Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Periodically, inspect the bath seat for damaged or loose
components, and ensure that all parts are secure.
Check that there are no obstructions to normal, safe
operation.
To maintain appearance and good hygiene, clean
periodically with mild soap and rinse with warm water.
Wipe bath seat dry after each use.
NOTE: If any part or mechanism appears to be unsafe or
damaged, DO NOT USE THE PRODUCT. If you experience
problems, please contact Medline at 1-800-MEDLINE.
CONTENTS
* Remove contents from the box.
* Ensure that all parts are present before assembling the
bath seat.
Part
Identification
A
B
C
Short Thumbscrew
D
E
Long Thumbscrew
F
ASSEMBLY:
1. Place bath seat upside down on a
flat surface.
2. Place the leg section marked with
a "B" into the groove of the seat
bottom marked "B" (Figure 1).
3. Place the leg section marked with
an "A" on top of the "B" leg and
into the groove of the seat
bottom marked "A" (Figure 1).
4. Insert the shorter thumbscrew
through the middle hole at the
intersection of the legs, but do not
fully tighten the screw (Figure 1).
:
Part Name
Quantity
Bath Seat
Leg Section
Support Bar
Leg Frame
1
2
1
2
4
4
Figure 1
Figure 2
G2-201KRX1
REVISED: V1 121422
Publicidad
