Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
19. Remove Universal Wall Clip (EE) and using
5/16" drill bit, pre-drill marked hole locations into
drywall. Do not drill through the metal brackets.
If you are unsure if a stud is located
PRO TIP
behind markings, use 1/8" drill bit to
drill all holes. If no stud is present,
then use 5/16" drill bit to make holes
larger for drywall anchors.
20. Install Drywall Anchors (AA) into pre-drilled
drywall holes.
Hardware Used (Pack B)
AA
Drywall Anchor
Use a rubber mallet to lightly tap
PRO TIP
Drywall Anchors (AA) into the drywall.
19
20
x 4
15
AA
4x
Publicidad
