Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Use 1/8" drill bit to pre-drill holes into studs and
use 5/16" drill bit to pre-drill holes into drywall.
If you are unsure if a stud is located
PRO TIP
behind markings, use 1/8" drill bit to
drill all holes. If no stud is present,
then use 5/16" drill bit to make holes
larger for drywall anchors.
4. Install Drywall Anchors (AA) into pre-drilled
drywall holes. Drywall Anchors (AA) are only used
for drywall holes, extra Drywall Anchors (AA) may
be leftover.
Hardware Used (Pack A)
AA
Drywall Anchor
Use a rubber mallet to lightly tap
PRO TIP
Drywall Anchors (AA) into the drywall.
3
4
x 3
7
1x - 3x
AA
Publicidad
