iBACheck T5 Manual De Instrucciones página 6

English
(8) Unit Change：
User can press START【
measuring result after the result display.
(9) User can press START key for 1 second to start another alcohol test.
(10) Press & hold SET【
mode, "MEM" display together with record number will flash, and toggle
with the readings alternatively..
For example,
That means the 6th memory record is 0.03%BAC (or 0.3‰BAC)
(11) press SET【
MEM r-19, r-18, r-17 ... r-6, r-5, r-4, r-3, r-2, r-1, r-0
(12) Power off:
Press set
【
START【
Alert Signals
T5 is designed to alert user as following:
Zero
Safety
Level
Alert
Level
】for 2 seconds to go to memory recall
r - 6
MEM
follows by 0.030%BAC
】 to scroll memories from 0 to 9 as following.
to exit the PH model to ALC mode, Then press
】
】 for 1 second to turn off the machine.
For measurement between 0 ~ 0.08 ‰BAC (0 ~
0.008 % BAC or 0 ~ 8 mg /100mL or 0 ~ 0.04 mg/l)
indicate 0 and prevent false alarms due to mouth
odor or environmental residues
For measurements between Low Level and Alert
Lev el, the alcohol concentration level shows on the
display with white backlight.
For measurements equal to or above the alert
concentration level, the analyzer beeps together
with red backlight flashes for 10 times
】 key once to change the unit of the
04