Anker 535 Manual Del Usuario página 5

Flashlight Mode
Press the button once to turn on the ambient light.
3
x1
Hold the button for 2 seconds to turn on SOS mode.
3
2S
Trouble Shooting
Resetting Your Power Station
Reset
If your Power Station isn't working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory
reset. If the Power Station still doesn't work, please contact support@anker.com.
05
SOS
FAQ
Q1: What's the max power output of the AC port?
500W, and if you use the AC port for devices greater than 500W, the product will automatically turn off.
Q2: Can I recharge the product while charging connected devices?
Yes.
Q3: Can this product power a CPAP?
Yes, but do not forget to turn off the Power Saving Mode first.
Q4: Will this product lose power automatically if not powered off?
Yes, when the car socket or AC control button is turned on, even if no devices are being charged, there will still be a
certain amount of no-load power consumption. To avoid draining the battery, we recommend keeping Power Saving
Mode turned on except when you are charging low-powered devices like CPAP machines and cameras.
Q5: What kind of solar charger can charge this product?
Any 11V-28V solar charger with a DC 8mm (DC 7909) male connector.
Specifications
Cell Capacity 512 Wh
DC Input 11-28V
Car Charger Output 12V 10A
AC Output 220-240V~, 2.27A, 50Hz, 500W
USB-A Output 5V 7.2A (2.4A Max Per Port)
USB-C Input 5V 3A/ 9V
USB-C Output 5V 3A/ 9V
Discharging Temperature -4°F-104°F / -20°C-40°C
Charging Temperature 32°F-104°F / 0°C-40°C
Size 29.16 × 25.1 × 18.8 cm / 11.48 × 9.88 × 7.4 in
Net Weight 7.6 kg / 16.75 lbs
Gross Weight 8.87 kg / 19.55 lbs
Attention
Not permitted on aircraft.
10A (120W Max)
3A/ 15V 3A/20V 3A (60W Max)
3A/ 15V 3A/20V 3A (60W Max)
06