Safety • General Information - Simer 2300-04 Manual Del Usuario

Safety • General Information
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains
important instructions that should be followed during
installation, operation, and maintenance of the product.
This is the safety alert symbol. When you see this
symbol on your pump or in this manual, look for one of
the following signal words and be alert to the potential
for personal injury!
indicates a hazard which, if not avoided, will
result in death or serious injury.
indicates a hazard which, if not avoided,
could result in death or serious injury.
indicates a hazard which, if not avoided,
could result in minor or moderate injury.
NOTICE addresses practices not related to
personal injury.
Carefully read and follow all safety instructions in this
manual and on pump.
Keep safety labels in good condition. Replace missing or
damaged safety labels.
California Proposition 65 Warning
This product and related accessories contain
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
NOTICE This unit is not designed for applications
involving salt water or brine! Use with salt water or brine
will void warranty.
Specifications
Power supply required ............................. 115V, 60 HZ.
Liquid Temp. Range ................. Less Than 120°F (50°C)
Individual Branch Circuit Required (min.) ........ 15 Amps
Pump Discharge ........................................... 1-1/4" NPT
Adapter ..............................................3/4" Garden Hose
Risk of fire and explosion. Can cause
severe injury, property damage or death. Do not use in
explosive atmospheres.
Pump water only with this pump.
NOTICE This unit is not designed as a waterfall or
fountain pump, or for applications involving salt water or
brine! Use with waterfalls, fountains, salt water or brine
will void warranty.
Do not use where water recirculates.
Not designed for use as a swimming pool drainer.
For parts or assistance, call Simer Customer Service at
Performance
GPH (LPG) At Total Feet (M)
0 5
Model No.
(0) (1.5m)
Capacity Gallons (L)/Hour
2300-04
1,320 1,170
2305-04
(4,997) (4,429)
2310-04
1,740
2,160
2355-04
(8,160)
(6,600)
Electrical and Switch Specifications
Model No. HP
2300-04 1/4
2305-04 1/4
2310-04 1/4
2355-04 1/3
1. Know the pump application, limitations, and
potential hazards.
2. Do not use this pump in water with fish present. If
any oil leaks out of the motor it can kill fish.
3. Disconnect the power before servicing.
4. Release all the pressure within the system before
servicing any component.
5. Drain all the water from the system before servicing.
6. Secure the discharge line before starting the pump.
An unsecured discharge line will whip, possibly
causing personal injury and/or property damage.
7. Check hoses for a weak or worn condition before each
use, making certain that all connections are secure.
800-468-7867 / 800-546-7867
15
10 20 25
(3m) (6.1m) (7.6)
(4.6m)
1,020 810 510
(3,861) (3,066) (1,931) (-)
1,620 1,260 720 60
(6,120) (4,790) (2,700) (240)
Motor Full Load Individual Branch
Amps Circuit Req. (Amps)
5.6 10
6.0 10
5.6 10
10.0 15
2
-