Caliber HPA 605BT Manual página 12

MANUAL
Precautions
Points to observe for safe usage
Read this manual carefully before using this item and its components.
They contain instructions on how to use this product in a safe and
effective manner. Caliber Europe BV cannot be responsible for problems
resulting from failure to observe the instructions in this manual.
Turn off the device immediately in case of a problem.
Failure to do so may cause personal injury or damage to the product.
Return it to your authorized Caliber Europe BV dealer for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything else
has the chance of dissolving the paint or damaging the plastic.
Temperature.
Ensure that the ambient temperature is between 0°C and +45°C
before turning on the device.
Thank you for choosing our product. We hope you enjoy using the device. Below the description of the features of the
HPA. The number between the "(...)" refers to the key or connection on the device. The illustration can be found in the
first pages of this manual.
Warning: Make sure all volume knobs are set to minimum levels before powering ON speaker.
Power ON/OFF (30)
Volume
Master Volume button on the back controls the main volume (21).
The remote control adjustable max volume is limited by main volume and does not work if the main volume is
set to minimum.
When the 'Clip LED' (20) on the back of the device is lit; overload occurs. Set the main volume lower, to prevent
damage to the speakers or other components.
Battery charging
The device has a built-in rechargeable battery. Place the provided power cord, plug one end into the device
and plug the other end (euro plug) into a wall socket. For the first time; charge the battery for 9 hours. While
charging, the charging LED (19) is lit. The device will operate without the wired connection using the battery.
Don't charge the device longer than 24 hours.
Note: loud music and bass need more energy than e.g. spoken text.
Connecting an external battery
Proceed with caution, to prevent damage to the product or battery:
• Always turn the device OFF, before connecting or disconnecting the power cables. When connecting the
power cables, connect the positive (red) power cable first, then the negative (black) power cable, to avoid
damage.
• Make sure the polarity of the battery and the device side correctly. Positive pole (Red) of battery to
the positive terminal (+) of the device. Negative pole (Black) of battery to the negative terminal (–) of the
device.
• If the battery is not used for a long period of time, remove the power cables to prevent damage.
• I ncorrectly installing or using an incompatible battery may increase the risk of fire or explosion.
Maintenance.
If you have problems, do not attempt to repair the device your-
self. Return it to your Caliber Europe BV dealer for servicing.
Placement.
Place the product on a flat surface. Provide enough space
around the product for sufficient ventilation.
Heat.
Do not locate the appliance in the vicinity of a heat surface or
in direct sunlight.
Voltage.
Check the main voltage indicated on the adapter/product rating
label in accordance to the local electricity supply, if it doesn't,
return the product to the store where you bought it.
Plug.
Remove the plug from the outlet, when the product is unused
for a long period of time and during thunderstorms.
Accessories.
Use only supplied accessories.
Replace battery.
The built-in rechargeable battery is not replaceable. Do not
remove or replace the battery, do not throw in the trash or in
the fire. Use only supplied charging adapter.