Publicidad
Idiomas disponibles
Idiomas disponibles
-ID cards and documents could loses their validity if they are laminatedbecause the o cial status of the
document can no longer be validated.
-If you transfer the laminator to others, always hand over this operatingmanual with it.
-If very soft material (such as serviettes) or very small size material is tobe laminated, we recommend i
nserting a folded sheet of paper in the foilpocket too, to prevent the possibility of the document being
laminatedfrom jamming. The folded edge of the sheet must be inserted into thelaminator rst.
We cannot guarantee that the information which relates to the technical properties of the product or to the
product itself contained in this document is correct. The product and its accessories described in this
document are sub-ject to constant improvement and further development. For this reason, we reserve t
he right to modify components, accessories, technical speci cations and related documentation of the p
roduct described herein at any time with-out notice.
This laminator can be used for the hot or cold lamination of photos, card, documents, paper etc. Any other
use is considered unintended use. Unau-thorised modi cations or reconstructions are not permitted.
Protection and re nement of your documents. Lamination of photos, documents, graphics etc. up to the
sizes A3.
The device operates using 4 heating rollers (A 2048, A 3048) or 2 heating rollers has a fast warm-up phase and
laminates without carriers.
•An LED strip indicates the operating status
•Automatic switch-off in the event of overheating
•High quality heating system prevents smudging and blistering
•Warm-up phase of approx. 2 minutes (8μm setting), max. 5 minutes(other settings)
•Cool down phase to room temperature, approx. 30 minutes
•Foil thickness using: min. 80 μm, max. 175 μm
•Foil thickness using: min. 80 μm, max. 250 μm
Laminating system Hot roller technology, 4 heating rollers
Maximum laminating width: 330 mm
Maximum lamination thickness: 0.6 mm
Laminating speed: 430 mm/min
Power supply: 220-240 Volt / 50 Hz
Rated input power: Max. 800 W, 3.48 A
Dimensions (L x W x H): 476 x 190 x 123 mm
Weight: approx. 4.2 kg
15
Publicidad
