Publicidad
Idiomas disponibles
Idiomas disponibles
E. Knife
F.
Sealing lever
G. Pressure rail with knife guide
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 10 cm from any wall of the unit. Keep the unit away from any
hot surfaces. Always operate the unit on a level, stable, clean, fireproof and dry
surface and out of the reach of children and persons of impaired mental, sensory
and intellectual functions. Place the unit in such a way that the mains plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
ASSEMBLY OF THE UNIT
First install the crossbar for the bag roll holder (B). To do so, insert its brackets into
the special grooves in the machine (see the following picture). On these brackets
attach the crossbar by pressing it into the grooves of the brackets.
Then connect the power cable to the socket (C) on the back of the unit. Connect its
plug to a grounded power outlet.
IMPORTANT: before first use, remove the protective film on the metal parts of the
unit (see picture below).
Publicidad
