Descargar Imprimir esta página

Steinberg Systems SBS-SEM-250 Manual De Instrucciones página 29

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 82
CAUTION: The cutters are very sharp - risk of serious injury!
Install in the reverse order of removal.
3.4.2 Replacing the fabric belt
First remove the clamping rail (see previous section).
Then loosen the screws at the front and remove the front and rear clamping rails to
access the fabric belt.
Remove old belt and attach new belt. Install in the reverse order of removal.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this unit are
recyclable according to their marking. You will be making an important
contribution to protecting our environment by reusing, recycling or otherwise
disposing of used units.
Your local administration will provide you with information about the
appropriate disposal point for used units.

Publicidad

loading