Changing The Light; Starting; Energy Saving Tips - Johnson JFF7660 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7) Put the refrigerating door on the middle hinge , install the upper hinge, hinge cover and hale cap .

2.4 Changing the Light

Any replacement ar maintenance of the LED lamps is intended to be made by
!he manufacturer, ils service agent ar similar qualified person.
2.5 Starting to use
@JLJ

2.6 Energy saving tips

• The appliance should be located in the coolest a rea of the room, away from heat
producing appliances ar heating ducts, and out of !he direct sun light.
• Le! hot foods cool to room temperature befare placing in the appliance. Overloading
the appliance forces the compressor to run longer. Foods that freeze too slowly may
lose quality, ar spoil.
Be sure to wrap foods properly, and wipe containers dry befare placing them in the
• appliance. This cuis down on frost build-up inside !he appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, ar paper
• toweling. Liners interfere with cold air circulation, mak ing the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and clase the door as soon as possible.
hinge cover
Befare inilial start, keep !he refrigerator still far half an hour
befare connecting it to power supply.
Befare putting any fresh ar frozen foods, the refrigerator shall have run
far 2-3 hours, ar far above 4 hours in summer when the ambient
temperature is high.
• Spare enough space far convenient opening of !he doors and drawers ar
statement by the distributor.
10
hole cap
V.1

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido