Cleco 936491PT Manual De Instrucciones página 22

Initial operation
3
2.2.1 Operating status
LED
Charger
Lights up
Flash 2 Hz
Lights up
3 Initial operation
WARNING!
Risk of explosion if other batteries are used
Use only to charge CLECO lithium ion batteries, order no. 936400PT or order no. 935377.

Never use to charge other battery types.
LED
Disconnect the charger from the power supply, wait about 1 minute and then reconnect.

22
Graphic Status
Off
Power supply
connected
Error charger,
see 4 Troubleshooting
Defect,
see 4 Troubleshooting
should not be flashing red before it is plugged in. The battery could be damaged.
P2069BA/INT 2016-08
EN
LED
Battery Graphic
Lights up
Flash 1 Hz
Flash 2 Hz
Lights up
Connecting the charger to the power network:

LED lights up green and indicates that
power is supplied.
Plug the battery into the charger and make

sure that it is securely connected.
LED is flashing green, indicating that
charging is in progress.
Status
Off – No battery contact
Battery is charged
Battery charging
– Only 44 V –
Error battery,
see 4 Troubleshooting
Defekt battery,
see 4 Troubleshooting
2069b_1_5_en_bedingt.fm, 04.08.2016