Publicidad
Idiomas disponibles
Idiomas disponibles
An installation kit is included in the packaging. Follow the instructions below:
1. Select the right place on the wall.
2. Place the mounting template on the wall, making small marks where the holes are to be
located.
3. Remove the mounting template and drill holes in the wall.
4. Insert the plugs into the holes made.
5. Screw the four metal anchoring pieces to the wall with the 6.3 x 50 mm screws.
6. Screw the four fastening cylinders to the product as shown in Figure 1.
7. Insert the product plus cylinder assembly from point 6 into the metal wall anchoring parts
and fasten with the 2.9 x 9.5 mm grub screw.
Nº.
ITEM
Plug 10 mm
1
Angular Metal Part
2
Screw 2.9 x 9.5 mm
3
Screw 6.3 x 50 mm
4
Product
5
4. SCREEN & KEYPAD
The control panel consists of 7 LEDs and 4 mechanical mechanical buttons with the
following functionalities:
1 2 3 4 5 6
7
IMPERO OVAL ELECTRIC TOWEL RAIL
5
1 2 3 4
LED indicators
5 6 7
Power / Stand-by / Confirmation button
Increase temperature button
Decrease temperature button
Maximum power button
Infrared sensor
3
2
1
4
5
EN
11
Publicidad
