RAVAK H2O Color ML 1 Manual De Instrucciones página 19

2.3 Electrical installation
The product must be connected according to the applicable standards and regulations and may be con
nected only by a person with the necessary electrician qualifications.
Connect the control unit according to the diagram (Fig. 2). The diagram is also placed on the lid of the control
unit. Pay close attention when connecting the conductors to the terminal in order to prevent damage to the
product. Tighten the bushing nuts to hold the cables so they cannot be torn out. You can briefly test the sys-
tem function without filling the tub right after installation.
Fig. 2: Control unit connection
GB
5