ControlloCasa USBy v3 Manual Del Usuario página 19

V 3.0 Page : 19/67
:
ERSIONE
Enter the Password in the respective field and press the ACTIVATE button.
If the USBy configuration requires an alignment of the communication channel with your
Router / Modem, the following information window will be displayed.
In this case, close the information window
Make sure you are connected to the network created by USBy otherwise reconnect to it
Press the ACTIVATE button
Once the communication channel between the USBy device and your Modem/Router has
been successfully activated, the following interface will be displayed
In the event of an error or connection problems between the USBy device and your Router
/ Modem, select the HELP option in the menu or consult the following link:
https://www.controllocasa.com/en/usby-faq-2
www.ControlloCasa.it info@controllocasa.it +39 06 94804820