TRAPP WM-350 Manual De Instrucciones página 23

www.trapp.com.br
Grass cutting height:
1. Higher
2. Medium
3. Low
3
2
3
1
2
1
To avoid engine overload, select the cutter

3
2
edge height according to yard condition.
1
For the types of grass used in Brazil, it is

recommended to keep them 2 and 3cm high
from soil. If lawn is excessively high, perform
2 or more cutting with different height
adjustments. This procedure will help to
improve equipment life, thus avoiding a blow
out due to electric engine overload.
Cleaning the Motor Compartment
Note:
Clean the motor compartment once every
15 hours.
Obs.: To cleaning, remove the 3 screws on the
engine cover at the botton of the lawn
mower.
1 2 3
1 2 3
1 2 3
3
2
3
1
2
1
3
2
1
For WM-350 model (with grass catcher), use

clockwise sense to cut your lawn, according
to the illustration below.
If your lawn is very high, avoid overloading

the engine by using only half of cutter cutting
range, as shown below.
Motor
protection
cover
Screws
23