Publicidad
Idiomas disponibles
Idiomas disponibles
Install the Platter and Counterweight
1.
Place the turntable on a flat and level surface.
2.
Carefully place the platter (with drive belt) on the spindle
3.
Use the red ribbon and belt hook to hook the drive belt around the motor
pulley.
Remark: Make sure not to twist the drive belt. After looping the belt, do not
forget to remove the red ribbon.
4.
Place the slip mat on the platter. Ensure the logo is facing up when placing
the slip mat.
5.
Push the counterweight onto the end of tonearm with tracking force dial facing
toward the front of the turntable.
4
Publicidad
