Singing Wood VP42AS Manual De Usuario página 8

Connecting an Audio Device
1. Set Phono/Line Out Switch according to the jacks of your stereo system
(amplifier or active speakers).
2. When your stereo system has Phono input jacks (connect to Phono input
jacks) and set to PHONO. The Equalizer function is off.
3. When your stereo system does not have Phono input jacks (connect to AUX,
VIDEO input jacks, etc.) and set to LINE. The Equalizer function is on.
4. Connect the RCA audio cable with the white plug to the white (L) jack and
connect the cable with the red plug to the red (R) jack.
Connecting the Power
1. Connect the Power adaptor to the power input jack on the back of the
turntable firmly.
2. Plug the Power adaptor into a wall outlet.
Basic Operation
1. Adjust the volume control to minimum level, and switch the power on.
2. Press the mode button to navigate between operations:
Turntable -> Bluetooth
Remark:
- Every time you turn on the turntable, it will switch to the last playback mode
you selected.
- Press and hold the mode button, the turntable will enter into standby mode.
-
Press and hold the mode button again to resume operation.
6