Publicidad
Idiomas disponibles
Idiomas disponibles
Playing a Record
1.
Remove the protector from the stylus cartridge.
2.
Press the mode button to select turntable operation. The mode indicator turns
green.
3.
Place a record on the platter. Use the 45 RPM Adapter if necessary.
4.
Turn the Off/ 33 /45 knob to select 33 or 45 RPM speed according to the type
of record. The platter will start spinning.
5.
Release the tonearm clip and set the tonearm lift lever to the up position.
6.
Gently move the tonearm over the record where play is desired to begin. Set
the tonearm lift lever to the down position, the tonearm will descend slowly
onto the record and begin to playback.
7.
Adjust the volume level as desired.
8.
When the record is finished playing, set the tonearm lift lever to the up
position and then return it to the tonearm rest.
9.
Turn the Off/ 33 /45 knob to Off position, the platter will stop spinning.
Bluetooth Operation
1.
Press the mode button to select Bluetooth operation. The mode indicator
turns blue.
2.
Choose the Bluetooth menu in your Bluetooth device, and from the found
devices, select the "Singing Wood VP42". If you are prompted to enter the
PIN code, please enter "0000" (four zeros).
3.
The Bluetooth is connected after successful connection.
4.
Play from the Bluetooth device.
7
Publicidad
