Domo DO232AZ Manual De Instrucciones página 32

DO232AZ
PARTS
1. Vacuum tube
2. Grip
3. Hose
4. On/off switch
5. Handle
6. Locking clips
7. Hose connection
3
USE
1. Unlock the clips and remove the upper part of the appliance. Remove the
accessories from the dust container.
2. Connect the tube to the hose. If you want to clean precisely,
attach the crevice nozzle to the tube.
3. Make sure that the black iron rack is seated inside the dust bag
to prevent the dust bag from being sucked in by the motor. Also
make sure that the dust bag is properly attached to the dust
container. The rubber edge of the dust bag should be wrapped
around the edge of the dust container so that the dust bag will be
kept into place during use.
4. Replace the upper part onto the dust container and lock with the
clips.
5. Attach the hose to the connection on the dust container.
6. Plug in the power cord.
7. Press the on/off switch to turn the appliance on and off.
4
5
6
12
2
1
7
8. Dust container
9. Crevice nozzle
10. Iron rack
11. Dust bag
12. Dust filter
13. Connection for hose
9
10
32
13
8
11