BEARWARE 304950 Manual página 13

Thank you for choosing a Bearware product. Please read the following user man-
ual carefully so as to get the most from the product you have purchased. Before
using the product, first check that the delivered item is complete, accurate and
undamaged.
1. Scope of delivery
• DIN rail timer
• User manual
2. Technical data
Input voltage
Maximum load
Operating temperature
Backup battery
Min setting time
Protection class
Protection category
Degree of soiling
Creep resistance
Overvoltage category
3. Important tips
Do not connect any devices, where the current of 16 (2) A is exceeded. If you
need to clean the product, first disconnect the timer completely from the mains,
remove it from the rail and wipe the device using a dry cloth. Never immerse the
timer in water or other liquids! Heaters and similar devices should never be left
unattended during operation. The manufacturer recommends not connecting any
such devices to the timer.
• Only for use in dry interiors
• Do not insert / connect in series
• Disconnected only when the plug is removed
• Do not use with heating elements (e.g., heaters, irons, kitchen
appliances, etc.)
English
230 V AC 50 Hz
16 (2) A, 3680W µ
-10°C to +40°C
NiMH 1.2 V (> 100 hours)
1 minute
II
IP20
2
PTI 175
4kV
13