BEARWARE 304950 Manual página 18

6. Setting the current time
1. Press and hold the "C+" button. Press the "W+" button repeatedly at the
same time. The current day in the timer display changes every time the
button is pressed. Keep pressing the "W+" button until the current day is
displayed.
2. Continue by pressing the button "H+" or "M+" until the current hour or min-
ute is displayed. The "W+", "H+" or "M+" buttons can be pressed and held
during setting for incrementing quickly.
3. Release both the buttons to stop the setting.
4. To reset any incorrect entry, repeat the above steps.
7. Setting the timer programs
Note: Check your programs to ensure that the settings do not overlap, especially
when using the block option. If the program settings overlap, then the Timer ON or
OFF is executed based on the program time and not the program number.
OFF Program always has priority over ON program.
1. Press the
setting can now be setup.
2. Press the "W+" button to set the day or block of days. Set the time by
pressing the "H+" or "M+" button.
3. Press the
adjust the first OFF setting. The LCD display shows 1
complete the first OFF setting.
4. Press the
adjust the second ON setting.
18
button once and release. LCD shows 1
button once again to complete the first ON setting and to
button once again to complete the first OFF setting and to
--:--. The first ON
ON
--:--. Repeat step 2 to
OFF
English