Publicidad
Idiomas disponibles
Idiomas disponibles
ROUGH-IN INFORMATION: OVATION TUB
3-1/16"
(78mm)
30"
(762mm)
C/L of pipe
location from
GENERAL SPECIFICATIONS FOR 2647 TUB
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
27.75 X 53.125 In.(705 x 1349mm)
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
1
INSTALLATION AND FRAMING INSTRUCTIONS:
A.) Locate studs as required. Ensure roughing-in dimensions are
proper, plumb, and square. It is strongly recommended that an
additional opening be provided for access to the drain components.
B.) As shown in ILL. 2, mark the position of the underside of the
deck by tracing a line onto the studs at the height indicated,
using a level or other suitable straight edge.
C.) With the top of the stringer touching the traced line, attach the
stringer to the studs.
D.)
Install drain components to the bath following the manufacturer's
instructions. See the roughing-in drawing for suggested opening
size and location dimensions.
9-1/2"
(241mm)
15"
(381mm)
1-7/8"
(48mm)
tub edge
60 x 30 x 18 In.
(1524 x 762 x 457mm)
60 Lbs. (27 Kg)
435 Lbs.(197 Kg)
45 Gal. (170 L)
22.25 x 44.25 In.(565 x 1124mm)
11.25 In. (286mm)
35 Lbs./Sq.Ft. (170 Kgs/Sq.m)
27.5
28.4
60"
(1524mm)
3-1/2"
(89mm)
3"
(76mm)
16-3/4"
(425mm)
11-1/4"
(286mm)
Depth to
Overflow
ILLUSTRATION 1
ILLUSTRATION 2
16-3/4"
(425mm)
2
3-13/16"
(97mm)
33-3/4"
(857mm)
1"
(25mm)
17"
(432mm)
Each alcove
stud must
be plumb
and square.
754916-100
Publicidad
