Technical Data; Limited Warranty - Bad Boy PS80B120A10 Manual Del Operador

Problem Possible cause Solution
The motor runs,
When you use
but the chain
the machine un-
does not cut cor-
der load, it
rectly, or the mo-
stops.
tor stops after
around 3 sec-
The chain is not
onds.
lubricated.
12

TECHNICAL DATA

Motor
Voltage
Guide Bar Length
Chain Pitch
Chain Gauge
Chain Oil Capacity
Length (No Extension
Pole)
Length (Extension Pole)
Weight (Without Battery
Pack)
Chain
Guide Bar
Battery Model
Charger Model
The recommended ambient temperature range:
Item
Appliance storage temper-
ature range
Appliance operation tem-
perature range
Battery charging tempera-
ture range
Charger operation temper-
ature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
English
1. Release the
trigger.
2. Start the ma-
chine again.
Lubricate the
chain to de-
crease the fric-
tion.
Brushless
80V DC
10'' (254 mm)
1/4" LP (6.3 mm)
0.050''(1.27mm)
80 ml
6.8 FT
8.9 FT
8.8 lbs (4 kg)
25AP058X/Q5058
100SDAA041/
MQ501058-1041TL
BAT80V20A and other
BAT 80V series
CHA180VA2 and other
CHA 80V series
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
13

LIMITED WARRANTY

BAD BOY hereby warranties this product, to the original
purchaser with proof of purchase, for a period of
four (4) years against defects in materials, parts or
workmanship. BAD BOY, at its own discretion will repair
or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline, at 888-227-9443.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to
pay transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by BAD BOY.
Company name: Bad Boy, Inc.
Address: 102 Industrial Drive
Batesville, Arkansas 72501
13
EN