Buffalo FB864 Manual De Instrucciones página 13

10. Programming Mode
This mode allows the user to set cook time and power level to the preset programs of the number
buttons.
1. Open the door. Then press the number button "1" for 5 seconds. The buzzer will sound once and
enter Programming Mode.
2. "PROGRAM" is shown.
3. Press the number button, e.g. "3", the display will show "P:03". After 2 seconds, the default cooking
time " :30" is shown. Now you can press the number buttons to set the desired cooking time.
4. Press , ,
If the same button pressed twice, the power will change to full power.
5. After setting cooking time and power, press
• Note: If all the cooking time exceeds the maximum time allowed by User Option 7, when pressing
to save the program, the buzzer will sound 3 times briefly to indicate the time is not valid. Then
the display will turn back to show "PROGRAM". The time set before will have no change.
6. Close the door, the oven will turn back to Ready Mode.
• Note: If pressing
saved will be lost. If there is program saved as memory procedure, press the related number button,
the saved program will start. If no program saved, the buzzer will alarm when pressing number
buttons and thus it will not work.
For example, if desired to set a program as memory cooking, with power level PL7 and cooking time of
1 minute and 25 seconds, please follow below operations:
Step1: Open the door. Then press number button "1" for 5 seconds, "PROGRAM" is shown.
Step2: Press the number button, e.g. "3", the display will show "P:03". After 2 seconds, the default
cooking time " :30" is shown.
Step3: Press number buttons "1", "2" and "5" to set the cooking time. "1:25" is shown.
Step4:
Press
Step5:
Press to save. "PROGRAM" is shown again. When to use the program next time, just
press the number button "3", the related program will start automatically.
Note:
• If power supply is cut off, the saved program will not be lost.
• If the program needs to reset , just repeat the above steps.
• If pressing at the last step, it will return to Door Open Mode. All settings will not be saved.
FB864_FE142-E_ML_A5_v3_20221227.indb 13 FB864_FE142-E_ML_A5_v3_20221227.indb 13
or to set the power level. The display will show the related power.
during setting, the oven will turn to Door Open Mode. The program that is not
. "1:25 70" is shown. Setting is now finished.
to save. When saved, "PROGRAM" is shown.
EN
13
2022/12/27 15:12 2022/12/27 15:12