Descargar Imprimir esta página

Buffalo FB864 Manual De Instrucciones página 15

Microondas programable

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 97
13. User Option Mode
This allows the user to choose between various ways for the oven to operate.
1. Open the door and press "2" for 5 seconds to enter User option mode.
2. The display shows "OP: - -".
3. Press any number button to enter related mode setting.
For example: Setting the voice of the buzzer to medium. Press "2", "OP:22" is displayed. If you want
to change, keep pressing "2", the display will show "OP:20", "OP:21", "OP:22", "OP:23", "OP:20".....in
cycle.
4. Press
to save the current setting. After saved, "OP: - -" is displayed again.
Notes:
During setting, press
If
button not pressed at the last step, the program cannot be saved but returns to previous
state.
14. Service Mode
1. Open the door and press "3" for 5 seconds to enter service mode.
2. The display shows "SERVICE".
3. To check the times of closing or opening the door, just press number button "3", the display will show
the times. Or you can press other number buttons to check related information:
4. Press
to enter Door Open Mode. Close the door to enter Ready Mode.
15. Factory-default setting
In ready mode, press
display will show "CHECK".
If it is in the factory default setting, the display will show "11".
If NOT in the factory default setting, the display will show "00".
If desired to restore the default setting, press
"CHECK" and finally "11" . Now the factory-default settings are restored.
Note: Be careful of the operations as it will restore all the factory-default settings.
Note: Should the restoration of default settings fail, please just repeat above operations.
FB864_FE142-E_ML_A5_v3_20221227.indb 15
FB864_FE142-E_ML_A5_v3_20221227.indb 15
to enter Door Open Mode. Close the door to enter Ready Mode.
Press "1" to check tube hours
Press "2" to check tube cycles
Press "3" to check door cycles
Press "4"
and to clear service information
and "0" to check the factory-default setting. The buzzer sounds once and the
again. The display will show "CLEAR" first, then
EN
15
2022/12/27 15:12
2022/12/27 15:12

Publicidad

loading

Este manual también es adecuado para:

Fe142-e