Corghi DV 120 Manual De Uso página 16

WARNING
Failure to observe these instructions and the relative danger warnings may cause seri-
ous injury to the operator and other people present.
Do not power up the machine before you have read and understood all the danger/
warning/attention notices in this manual.
This machine must be used only by qualified and authorised personnel. A qualified
operator is construed as a person who has read and understood the manufacturer's writ-
ten instructions, is suitably trained, and is conversant with the rules on safety at work..
Operators are expressly forbidden from using the machine under the influence of alcohol
or drugs capable of affecting physical and mental capacity. However, safe work is possible
if the medication has been prescribed by the operator's doctor. The operator must:
- Read and understand all information provided.
- Be familiar with the capabilities and characteristics of this machine.
- Make sure that all machine operators are suitably trained, that they are capable of using
the machine correctly and safely and that they are adequately supervised during their
work.
- Read this manual carefully and learn how to use the machine correctly and in safety.
- Always keep this operator's manual in a place where it can be readily consulted when
working with the machine and consult it when necessary.
WARNING
Do not remove or deface the safety Danger, Warning or Instruction decals. Replace
any missing or illegible Danger, Warning or Instruction decal. Missing or damaged
decals can be obtained at a CORGHI dealer.
- When using and carrying out maintenance on the machine observe the unified industrial
accident prevention regulations.
- Any unauthorised alterations made to the machine automatically release the manufac-
turer from any liability in the case of damage or accidents in relation to such alterations.
Specifically, tampering with or removing the machine's safety devices is a breach of the
regulations for industrial accident prevention.
16
SAFETY REGULATIONS
DV 120 operator's manual