FAAC XKPR125D Manual Del Usuario página 18

EN
Translation of the original instructions
9
10
11
12
MAINTENANCE
Clean the outer surfaces only with a soft cloth. Do not use detergents or oils. Do not make any modifications
to the original components. Only use original FAAC spare parts.
XKPRD
When this figure appears on the display, it
indicates that there are problems with the
connection between the XKPRD and the Door
Controller.
#
Pressing the button will display the address of
the XKPRD reader (A or B) and the version of the
firmware currently installed.
#
Pressing the button again will display the ad-
dress and the firmware version of the Door Con-
troller, to which the XKPRD reader is connected.
#
Pressing the
the IP address of the Door Controller (D) and
the Network Controller (N) when they are
communicating.
Warning:
This function is available only for LAN Door
Controllers.
18
button a third time will display
532229 - Rev.C