Publicidad
Idiomas disponibles
Idiomas disponibles
EN
WARNING
Do not disassemble or remodel the product in any way
other than what is described in this manual.
Improper modifications may cause scalding water that can injure you
Disassembly
and may damage the product and cause leakage resulting in water
Prohibited
damage to property.
When using hot water at high temperatures, do not directly
touch the spout and faucet main body.
The spout and faucet main body can become hot enough to scald you
Do Not
when touched.
Touch
Check the lever handle location before turning on the water.
If you turn on the water when it is set to the hottest setting, the water
may be hot enough to scald you. When using hot water, start with cold
water first and then adjust the water temperature slowly to the desired
temperature.
After using hot water, turn on the cold water for a while.
Hot water could remain in the faucet and come out at your next use
and may scald you.
Periodically (more than twice a year) check around the
piping for water leakage and loose connections.
Mandatory
Parts may get damaged from deterioration and wear and may cause
leakage resulting in water damage to property or cause injuries such
as scalding.
Set the cold water supply pressure higher than or equal to
the hot water supply pressure.
In order to prevent scalding due to unsafe operation, the cold water
supply pressure must be set higher than or equal to the hot water
supply pressure. If increasing pressure on the hot water side, make
sure the hot water supply pressure side is set lower than the cold
water side.
2
Publicidad
