Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL DESCRIPTION
The unit is supplied fully wired and programmed from factory to perform a check at a var
The module consists of the following sections: G4 pr
re below shows the main components of the module.
PREFILTER AND
GRSYSTEM SECTION
FLOW
PRODUCT
(m3/h)
RANGE
175/115
AIR PRO 100
195/130
260/140
AIR PRO 300
300/160
Maintenance
FAN
ABSOLUTE FILTER
SECTION
SECTION
Maintenance
UNIT DIMENSIONS
PRESSURE
AVAILABLE
H x W x L (mm)
(Pa)*
100
207 x 639 x 929
50
100
207 x 639 x 929
50
Thank you for choosing Zonair3D
Please take a few minutes to read this manual carefully before
r, GRSystemTM g
r, fan and H1
1- Pressure switch connection cable
(black with 2 terminal blocks joined together)
2- Zonair3D
TM
(probe not included), with 4 marked terminals, 5 and 6
attached to strip, 17 and 18 (attached
to strip)
3- 230 V network cable (2 phases + earth)
4- Main ON/OFF switch
5- PCB registration cover (4 M5 bolts)
6- H14 positive pressure tap
7- Differential pressure switch
8- Connection to the H14 positive pressure switch
9- M5 threads f
10- H14 negative pressure tap
11- Connection to the H14 negative pressure switch
12- Red LED to indicate HEPA1
CONSUMPTION
(kW)
0,027 (1 ud)
0,055 (2 uds)
products.
TM
using your AIR PRO 100-300.
ow.
r.
air quality probe connection cable
the anchor brackets
change
VOLTAGE AND
WEIGHT
FREQUENCY
(Kg)
230V - 50/60Hz
45,5
230V - 50/60Hz
46
Publicidad
