Westinghouse WKSMX1503 Instrucciones página 3

• Caution: In order to avoid a hazard due to inadvertent resetting of the thermal
cut-out, this appliance must not be supplied through an external switching
device, such as a timer, or connected to a circuit that is regularly switched on and
off by the utility.
• Only operate this machine under supervision.
• Do not interfere with any safety switches.
• Do not insert anything into the rotating hooks while the machine is working.
• Place the machine on a smooth, flat and stable working surface.
• Do not insert the mains plug of the machine into the power socket without
having installed all the necessary accessories.
OvERLOAD PROTECTION SYSTEM
The motor is protected from burning out by a Thermal Protector. If the appliance
is overloaded or operated continuously for too long, the motor may overheat and
stop. To operate the appliance again, it must be switched off and disconnected from
the power socket then left for at least 30 minutes. Once the motor is fully cooled
the appliance may be used again.
SAFETY INSTRUCTIONS
The motor will not start if the Mixer Head is raised. If it is raised during normal
operation,the safety switch will activate and the motor will shut off immediately.
Turn the Speed Control back to 0. Return the head to the locked position to start
the machine again.
WKSMX1503_Stand Mixer_10L_IB.indd 3
HOUSEHOLD USE ONLY
EN
3
10/5/2021 16:02:54